Aug 29, 2019 Make sure you are connected to the network when you perform the router hack. Q.3 Are all routers vulnerable to routersploit router password hack? Yes if they have default username and password, they are vulnerable and can be hacked with routersploit. Hacking routers with the default password is the easiest possible hack. Even a caveman could do it. This Mac OS X application guides you through a step-by-step process of cracking the security of a WEP based network and helps you crack it seamlessly. How to hack WiFi password with WiFi Crack? WiFi Crack chooses the specified WiFi networks and launches the powerful command line tools to obtain the wireless packets and get the WEP password.
MAC address filtering is one of those controversial features that some people swear by, whereas others say it’s a complete waste of time and resources. So which is it? In my opinion, it’s both, depending on what you are trying to accomplish by using it.
Unfortunately, this feature is marketed as a security enhancement that you can use if you are technically-savvy and willing to put in the effort. The real fact of the matter is that it really provides no extra security and can actually make your WiFi network less secure! Don’t worry, I’ll explain more about that below.
However, it’s not completely useless. There are some legitimate cases where you can use MAC address filtering on your network, but it won’t add additional security. Instead, it’s more of an administration tool that you can use to control whether or not your kids can access the Internet at certain times during the day or if you want to manually add devices to your network, which you can monitor.
Why It Doesn’t Make Your Network More Secure
The main reason why it doesn’t make your network more secure is because it’s really easy to spoof a MAC address. A network hacker, which can literally be anyone since the tools are so easy to use, can easily figure out the MAC addresses on your network and then spoof that address onto their computer.
So, you may ask, how can they get your MAC address if they can’t connect to your network? Well, that’s an inherent weakness with WiFi. Even with a WPA2 encrypted network, the MAC addresses on those packets are not encrypted. This means that anyone with network sniffing software installed and a wireless card in range of your network, can easily grab all the MAC addresses that are communicating with your router.
They can’t see the data or anything like that, but they don’t really have to break the encryption to access your network. Why? Because now that they have your MAC address, they can spoof it and then send out special packets to your router called disassociation packets, which will disconnect your device from the wireless network.
Then, the hackers’ device will try to connect to the router and will be accepted because it is now using your valid MAC address. This is why I said earlier that this feature can make your network less secure because now the hacker doesn’t have to bother trying to crack your WPA2 encrypted password at all! They simply have to pretend to be a trusted computer.
Again, this can be done by someone who little to no knowledge of computers. If you just Google crack WiFi using Kali Linux, you’ll get tons of tutorials on how to hack into your neighbor’s WiFi within a few minutes. So do those tools always work?
The Best Way to Stay Secure
Those tools will work, but not if you are using WPA2 encryption along with a fairly long WiFi password. It’s really important that you don’t use a simple and short WiFi password because all a hacker does when using these tools is a brute force attack.
With a brute force attack, they will capture the encrypted password and try to crack it using the fastest machine and the biggest dictionary of passwords they can find. If your password is secure, it can take years for the password to be cracked. Always try to use WPA2 with AES only. You should avoid the WPA [TKIP] + WPA2 [AES] option as it’s much less secure.
However, if you have MAC address filtering enabled, the hacker can bypass all that trouble and simply grab your MAC address, spoof it, disconnect you or another device on your network from the router and connect freely. Once they are in, they can do all kinds of damage and access everything on your network.
Other Solutions to the Problem
But some people will still say it’s so useful to control who can get on my network, especially since everyone doesn’t know how to use the tools I mentioned above. OK, that’s a point, but a better solution to control outsiders who want to connect to your network is to use a guest WiFi network.
Just about all modern routers have a guest WiFi feature that will allow you to let others connect to your network, but not let them see anything on your home network. If your router doesn’t support it, you can just purchase a cheap router and attach that to your network with a separate password and separate IP address range.
It’s also worth noting that other WiFi security “enhancements” like disabling SSID broadcasting will also make your network LESS secure, not more secure. Another one people have told me they try is to use static IP addressing. Again, as long as a hacker can figure out your network IP range, they can use any address in that range too on their machine, regardless of whether you have assigned that IP or not.
Hopefully, this gives you a clear idea of what you can use MAC addressing filtering for and what expectations to have. If you feel differently, feel free to let us know in the comments. Enjoy!
Hello friends, In this tutorial, I’m going to show you how to hack wifi. Many of my friends were asking me to write a tutorial on hacking wifi, so here it is.
You probably want to hack wifi because you want to enjoy free Internet.
For me, this was my only motivation to hack into someone’s wifi. This was the only reason for me at least.
I don’t know about you… but I guess you too want to enjoy free Internet.
So… here is the guide which will show you how to hack wifi step by step. I wrote this tutorial in such a way that every beginner will easily be able to crack any wifi. This is a step by step approach into hacking wifi.
RECOMMENDED: Ethical Hacking For Beginners
RECOMMENDED: Basic Linux Commands For Beginners
In this tutorial I’mg going to use the hackers OS.
Yes… the hackers OS which is Kali Linux.
I’m quite sure that you already know about Kali Linux and what it is used for. It is the most used hacking Operating System. The other one is Parrot OS. Which is also quite popular.
Also as a side note, I have written a tutorial on how to install parrot os, you can read it if you want to.
But for this tutorial, I’m going to use Kali Linux for wifi hacking. I’m running a live version of kali which is very cool.
Just in case you don’t know, live version means you are directly running the OS without having to install it on your disk.
Now, let us have a look at the types of WiFi Networks that you can find in your neighborhood.
1. Open Networks (You gotta be kidding me)
These types of networks don’t have any password to them. Anybody can connect to wifi a network that is open. I’m pretty much sure that nowadays you won’t find any wireless network with an open router configuration. If you have found one then you are very lucky.
2. Mac Filtered (Ummm… Not so secure)
Some people use mac filtering for their wifi security. In this type of wifi security, a person uses a whitelist to allow some devices, based on mac address to connect. Or a person can use a blacklist to block specific mac addresses that are not able to connect to the wireless network. This type of security is very easy to set up and does not requires much effort.
3. WEP (Easily hackable)
The WEP stands for Wired Equivalent Privacy. Wifi networks using WEP security are the easiest target for hackers because it has many vulnerabilities. So if you see a wifi network that is based on WEP security that you can easily hack that network. This security standard is not used by routers anymore. In the modern wireless routers, you won’t be able to find WEP option.
4. WPA (This person knows something about security)
This is the next version of WEP security. It stands for Wi-Fi Protected Access. It is somewhat better than WEP but not completely secure.
5. WPA2 (Pretty secure)
The WPA2 is very secure and can’t be hacked easily. Wifi networks using WPA2 security are considered as secure. But you surely can hack a WPA2 enabled wifi network but it will require more time.
READ: How To Hack Instagram
READ: Best Free Proxy Sites
How To Hack WiFi Passwords WPA & WPA2
Anyways, enough talking let’s jump right into hacking wifi networks.
But before you go ahead and hack your neighbor’s wifi, let me warn you! And here is a quick disclaimer for you.
Please don’t hack someone’s wifi in order to do some shady stuff. Don’t harm anyone. Also, I’m not liable for anything you do with this information.
So let’s start.
Now, if you want to hack wifi, you first need to discover all wifi networks around you. You’ll also need to get the information about the wifi networks that are within your wireless card range.
Of course, you can have a look at all the wireless networks by clicking on the connect wifi icon.
But this is not much help. You need to gather more information about the wireless network that you want to hack.
So, to do this you’ll need to change your wifi card to monitor mode. By default, it is in managed mode.
It is not a complex process, just follow the following simple steps:
Step 1: Find your wireless card name.
Simply run the command–iwconfig wlan0
You can see that the mine wireless card is named wlan0 and it is running in managed mode. To find your wireless card name simply run the command–iwconfig
Step 2: Run the following series of commands.
Also remember, if you are running these commands and not seeing any error then the commands are executing successfully.
Don’t think that if you are not getting any output, then the commands are not executing.
ifconfig wlan0 down
This command will turn off your wireless card. You need to run this command to make sure, you don’t have any error while trying to change the wifi card to monitor mode. Once you have turned off your wifi card run the next command.
iwconfig wlan0 mode monitor
Now, this is the command which will turn the mode of your wireless card to monitor mode.
ifconfig wlan0 up
Once you have changed the mode to monitor mode, you’ll need to turn on the wifi card.
That’s it, now you are in monitor mode and you can easily sniff packets from the wireless networks around you.
Just to make sure, perform the optional step 3.
Step 3: Check if you are in monitor mode.
Again run the command–iwconfig wlan0 and check the mode part. If it’s written monitor in front of it, you are good to go.
Run the command–airodump-ng wlan0 to see all the wifi networks around you.
Now, you’ll be able to see all the networks within your wifi range. You are able to see these network only because you’ve turned the wifi to monitor mode.
Now, you have successfully discovered information about the wireless networks around you. Let’s move onto the real stuff now.
In this wifi hacking tutorial, our primary focus is on hacking WPA and wpa2 wifi networks.
Because these are the two widely used wifi encryption techniques, the focus of this tutorial will also be on these encryption types. Since these are the most used encryption techniques, you’ll be able to hack the majority of wifi networks around you.
So to hack WPA and wpa2 wifi networks, you need to capture a handshake packet from the wifi network that you are trying to hack.
Think a handshake packet like a request which is sent to the wireless router every time a new client connects to it. This client needs to have all the credentials like a password in order to connect to the router.
So our first step is to capture the handshake packet. But remember, we can only capture this handshake only when a new client connects to the router.
Step 1: Capture the handshake packet.
So let’s first have a look at all the networks available.
Simply type airodump-ng wlan0
Now it will list all the wifi networks within your wifi card range. You can see I have only one access point available within my wireless card range.
So now you have some understanding of a few of the important columns. Let’s work now to hack this wifi network.
Run the above command and look for the wifi network which you are trying to hack.
So here, I’ve set up a network named hackingpress.com. This access point is going to be my target. You find your’s and follow each of the steps that I implement on this wifi network.
First, I will gather more information about this single wifi network, I will use the following command–
airodump-ng –bssid [bssid] –channel [channel] –write [filename] [interface]
This command will look like this in my situation:
The final command in your situation will be different. So make sure you run the command by supplying it the correct information. Otherwise, it will not work.
So once running this command, I’ll have all the details of this wifi network.
As you can see, there are two blocks in the image above. The first is listing all the information about the wifi network that I selected above.
And…
…the second block here is giving information about the devices that are connected to selected wifi network.
So…
…you can see, only one device is connected to this wifi network. Also, keep in mind I’m doing all this to capture the handshake. You also need to capture the handshake packet in your case.
But remember, what I said earlier…
…we can only capture a handshake only when a new device connects to the network.
Now you might be thinking that I’ll have to wait for a new device to connect to the network in order to get the handshake packet.
But, I got a little trick. I can disconnect this connected device from the wifi network using a simple command. Once the device is disconnected it will automatically try to connect to the network again. That is when a handshake packet will be captured.
I’ll simply run the command–
aireplay-ng –deauth [no. of packets] –a [MAC address of router] –c [MAC address of the device connected to the wifi]
The command will look like this:
Now, once I run the command the aireplay-ng program will send 4 deauthentication packets to the client device. This will make the client disconnect and reconnect to the wifi network and boom… I have now got the handshake packet.
A huge chunk of work is done now.
Step 2: Create a wordlist file
The next step is to create a wordlist file. The wordlist file will be used in the next step to crack the WPA password.
With crunch, we will create all the combinations of the letters that we think is in the wifi password.
For example, let’s say I know that this wifi network has a password which contains characters abc12345, but don’t know in which order. Also, I know the password is 8 characters long.
Now, one way is that I can try all the possible combination of these characters to connect to the wifi network.
The other way is that I’ll use the crunch utility to create all the possible combinations of these characters which have a length of 8. I’ll use this list against the handshake packet that I captured earlier.
I hope, you got the idea why we are using the crunch software.
Here is the basic syntax of the crunch that we are going to use:
crunch [min] [max] [characterset] -o [output filename]
Now I’ll create a wordlist file which has characters abc12345. The min and maximum length of the password will be 8 which will be stored in a file name my-wordlist in my case.
You can name it anything.
Once the wordlist is ready. We just need to crack the wifi password.
Step 3: Actually hacking the WiFiAirsnort
We’ll use aircrack-ng to hack the wifi password.
Here is the syntax of the aircrack-ng command–
Hack Wireless Router Password Mac Os
aircrack-ng [handshake-file] -w [wordlist]
In my case the command will look like this:
Hack A Router
After supplying the handshake file and the wordlist file to the command hit enter, it will start the cracking process.
The aircrack-ng uses a special technique to check each wifi password stored in the wordlist file against the captured handshake. Once a match is found it will tell you the wifi key which can be used to connect to the network.
Now, we have successfully hacked the wifi network. The key found is abc12345, which is correct. Once you have found the key for your desired WiFi network, you can use to connect to it.
Rundown: How To Hack WiFi Passwords WPA & WPA2
READ: How To Make A Windows PC Restart Forever
READ: Google Dinosaur Game Hacks
Hack Wireless Router Password Mac 10
So this was all about how to hack wifi using Kali Linux. As you can see the process of hacking wifi is very simple. You just have to follow some series of commands to hack any wifi network.
With the method above you can hack any WiFi network of encryption type WPA or WPA2. In the coming days I’ll be updating this post regularly to give you more methods on hacking wifi, so make sure you bookmark this page.
I hope this post was helpful for you!
Hack Wireless Router Password Mac App
If you have any doubts and queries, please leave a comment below. I’ll love to hear from you!
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |